靠谱的ag平台

Current location: Home > Product series > Bearing bush temperature sensor
Product series
Bearing bush temperature sensor
S series temperature sensor--corrugated pipe protection

Corrugated pipe protection temperature sensor S08Pt100-200-X-3113/C01K600
——————————————————————————————————————————————————————
Corrugated pipe protection temperature sensor (S08Pt100-200-X-3113/C01K600) is applied in monitoring the temperature of thrust, guide bearing and oil of water turbine set. In view of the special situation of the oil groove of the water turbine set, the optimized design is carried out for bearing bush temperature sensor. The corrugated pipe protection device is installed at the end of the sensor probe to enhance the protection of the conductor and reduce the possibility of the disconnection in the oil groove.

 
Applications of corrugated pipe protection temperature sensor
——————————————————————————————————————————————————————
It is applied in monitoring the temperature of thrust, guide bearing pad and oil of water-turbine generator set.
 
 
Functional characteristics of corrugated pipe protection temperature sensor
——————————————————————————————————————————————————————
The chip-type temperature sensing element adopts laser welding technology to prevent the solder joints from loosening or falling off in case of strong vibration, which effectively improves the stability of measurement.
Movable/fixed ferrule connection mode is available. The wire does not need to rotate with the probe during installation, and the insertion depth of the probe can be adjusted appropriately.
The corrugated pipe conductor protection device can effectively bear the load of the joint of rigid material and flexible material and prevent the conductor from breaking when the tail conductor swings frequently.
Oil and high temperature resistant shielded conductor, jacket and insulating layer are made of special polymers, which can work in the oil temperature of 100℃ for eight years. 
The copper-plated silver core has good conductivity, and the equilibrium degree of each hundred meters is less than 0.05Ω.
 
 
Technical parameters of corrugated pipe protection temperature sensor
——————————————————————————————————————————————————————
Model Corrugated pipe integrated thermistor
Testeck corrugated pipe integrated thermistor
Model: S08Pt100-200-X-3113/C01K600
Temperature measuring range -50~200℃
Wire system Three wire system
Process connection Movable ferrule thread M16×2 or other sizes
Casing pipe 304 stainless steel
Outer diameter of casing pipe Φ8、Φ10、Φ12
Protective device Corrugated pipe protection
Insulation resistance at room temperature >100MΩ
Response time τ0.5<15s
Conductor specification TST319020
Outer diameter of corrugated pipe Φ6.7



Recommended parameters of corrugated pipe protection PT100 thermal resistor
——————————————————————————————————————————————————————
Model S08Pt100-200-X-3113/C01K600 S12Pt100-200-X-3113/F01K600
Recommended parameters of Testeck corrugated pipe integrated thermistor
Insertion depth 200mm 200mm
Process connection Movable ferrule thread M16×2 Movable ferrule thread G1/2"
Length of thread 14mm 18mm
Length of corrugated pipe  600mm 600mm
Connection form Aciform  Aciform
Number of pairs Single piece Single piece
Application site Temperature of thrust bearing pad and oil Temperature of thrust bearing pad and oil