靠谱的ag平台

Current location: Home > Product series > Bearing bush temperature sensor
Product series
Bearing bush temperature sensor
S series temperature sensor--end face resistance

Pt100 end-face thermal resistor (S06Pt100-20-X-3110/A00)
——————————————————————————————————————————————————————
Temperature measurement shall be carried out close to the surface of the object to be measured. With accurate temperature measurement and vertical installation, it is used for temperature measurement of thrust pad, stator winding, iron core, pressure finger and enclosed bus shell.
 
 
Applications of PT100 end-face thermal resistor S06Pt100-20-X-3110/A00
——————————————————————————————————————————————————————
It is applicable in vertical installation of thrust pad, temperature measurement of stator winding, iron core, pressure finger and enclosed bus shell.

 
Features of PT100 end-face thermal resistor
——————————————————————————————————————————————————————
The chip-type temperature sensing element adopts laser welding technology to prevent the solder joints from loosening or falling off in case of strong vibration, which effectively improves the stability of measurement.
With a simple structure, it has good long-term stability and responses quickly when the end face of the sensor is close to the surface of the measured object.
It is especially suitable for installation and use in a narrow space or special occasions, and its volume is very small.
Oil and high temperature resistant shielded conductor, jacket and insulating layer are made of special polymers, which can work in the oil temperature of 100℃ for eight years. 
The copper-plated silver core has good conductivity, and the equilibrium degree of each hundred meters is less than 0.05Ω.
 
 
Technical parameters of PT100 end-face thermal resistor
——————————————————————————————————————————————————————
Specifications Parameter
  Testeck end-face thermal resistor S06Pt100-20-X-3110/A00
Temperature measuring range -50~260℃
Wire system
Three wire system
Process connection Movable thread M10 × 1 or other dimensions
Material
Non magnetic stainless steel
Outer diameter of casing pipe Φ6
Protective device With corrugated pipe protection (outer diameter of corrugated pipe Φ 6.7)
Insulation resistance at room temperature >100MΩ
Response time τ0.5<15s
Conductor specification TST319015

 
Recommended parameters of PT100 end-face thermal resistor
——————————————————————————————————————————————————————
Recommended model S06Pt100-20-X-3110/A00
  Recommended parameters of end-face thermal resistor
Application site Temperature of thrust, guide bearing and oil
Outer diameter of probe  φ6 Effective length 20mm Wire system Three wire system
Number of pairs Single piece Process connection Movable bolt Thread specification M8×0.75
Protective device None Connection form Swinging wire head